Bowler – GM Hydraulic Throw-Out Bearing (LS Engines, T-56 Magnum Transmissions)
OE LS internal slave cylinder with throw out bearing. To be used with GM Tremec T-56 Magnum transmissions only.
OE LS internal slave cylinder with throw out bearing. To be used with GM Tremec T-56 Magnum transmissions only. We have added two fittings that are standard -4AN male. No more expensive quick connect fitting & line combo needed. Use a standard -4AN braided line with the feed and bleeder setup to accept standard -4AN lines. No more messy bleeding the slave inside your bell housing or trying to extend the bleeder outside the bell housing.
To be used with GM Tremec T-56 Magnum only when being installed into an aftermarket hot rod, muscle car, or street rod application. Not designed to be used in factory vehicles equipped with TR-6060 transmissions.
- New GM LS Internal Salve W/ Bearing
- -4AN fittings for both feed and bleeder
- Two 12″ -4AN braided lines
- 1 bleeder
Recommend using .750″ bore master cylinder with 1.400″ stroke (not included). A pedal stop should be used.